AISI 301 STAINLESS SPRING STEEL STRIP
AISI 301 Hardened
Spring Steel Strip
The AISI 301 Hardened & Stainless Spring Steel Strip is stainless steel classified as austenitic, cold laminated, for manufacturing springs and devices requiring increased hardness, corrosion resistance, and reduced production time.
AISI 301 Hardened & Stainless Spring Steel Strip applications in the industry are:
- - Parts stamping in general.
- - Surface coating.
- - Spring Stainless Steel for manufacturing cutting tools and cutlery devices.
- - Foodstuff line.
- - Springs Manufacturing.
- - Chemical Industry.
- - Parts requiring surface finishing.
- - Spring Stainless Steel for manufacturing of parts used under liquid immersion
According to our slitter's technical specifications, our stainless steel strips may be supplied as coils, rolls, or steel strips cut to the width requested by the Customer.
More about stainless steel| C. Máx. | Si | Mn | P. Máx | S. Máx | Ni | Cr |
|---|---|---|---|---|---|---|
| 0.15 | 0.75 | 2.00 | 0.045 | 0.03 | 6 a 8 | 16 a 18 |
| Class | Hardness | Resistance to Traction (N/mm2) | Finishing |
|---|---|---|---|
| Hardened | 38 a 42 HRC | 1220 a 1350 | Bright |
Obs.:
1) Checking the batch hardness is required for parts subject to deep-drawing.
2) For BA finish, stock must be confirmed by our commercial department.
| Stock Standard. | ||||
|---|---|---|---|---|
| Thicknesses (mm) | 0.05 (+/- 0.01) 0.10 (+/- 0.02) 0.15 (+/- 0.02) 0.20 (+/- 0.03) | 0.25 (+/- 0.03) 0.30 (+/- 0.03) 0.40 (+/- 0.04) 0.50 (+/- 0.04) | 0.60 (+/- 0.05) 0.70 (+/- 0.05) 0.80 (+/- 0.05) 0.90 (+/- 0.06) | 1.00 (+/- 0.06) 1.20 (+/- 0.07) 1.50 (+/- 0.07) 2.00 (+/- 0.08) |
| Width (mm) | Maximum 310 mm | |||
Obs.:
1) Minimum delivery width is made available only after a previous analysis by our technical department.
2) For thicknesses over 2.00 mm, delivery is made only as blank or parts.
| DIN 1.4310 | X10CrNi18-8 | S30100 |
Mais produtos de Sandsteel Fitas
