Calibrated Shim AISI 301
Calibrated Shim AISI 301
The calibrated shim in cold-worked stainless steel AISI 301 is the ideal solution for applications requiring high dimensional precision, mechanical strength, and corrosion resistance. With controlled hardness between 38 and 42 HRC, this material offers excellent stability and performance in adjustments, leveling, and thickness compensation with tight tolerances.
Thanks to the properties of AISI 301, this calibrated shim combines high tensile strength with good bending capability, allowing for bends and adaptations as the application evolves. Its stainless composition ensures greater durability in environments exposed to moisture and corrosive agents, making it a reliable choice for industries such as automotive, industrial, and metallurgy.
If you seek precision, strength, and corrosion protection, the calibrated shim in stainless steel AISI 301 is the perfect alternative for your needs.
According to our slitter's technical specifications, our stainless steel strip may be supplied as coils, rolls, or steel strips cut to the width requested by the Customer.
More about stainless steel| C. Máx. | Si | Mn | P. Máx | S. Máx | Ni | Cr |
|---|---|---|---|---|---|---|
| 0.15 | 0.75 | 2.00 | 0.045 | 0.03 | 5 a 8 | 16 a 18 |
| Class | Hardness | Resistance to Traction (N/mm2) | Finishing |
|---|---|---|---|
| Hardened | 32 a 42 HRC | 1220 a 1350 | Bright |
Obs.:
1) Parts that will undergo deep drawing should have the batch hardness checked.
2) BA finishing must have confirmed stock with our commercial department.
| Stock Standard | ||||
|---|---|---|---|---|
| Thicknesses (mm) | 0.05 (+/- 0.01) 0.10 (+/- 0.02) 0.15 (+/- 0.02) 0.20 (+/- 0.03) | 0.25 (+/- 0.03) 0.30 (+/- 0.03) 0.40 (+/- 0.04) 0.50 (+/- 0.04) | 0.60 (+/- 0.05) 0.70 (+/- 0.05) 0.80 (+/- 0.05) 0.90 (+/- 0.06) | 1.00 (+/- 0.06) 1.20 (+/- 0.07) 1.50 (+/- 0.07) 2.00 (+/- 0.08) |
| Width (mm) | Maximum 310 mm | |||
1) Minimum supply width only with prior analysis by our technical department.
2) Thicknesses above 2.00mm are supplied only as blanks or parts.
| DIN 1.4310 | X10CrNi18-8 | 530100 |
Mais produtos de Sandsteel Fitas
